Welcome to the official website of Ruifeng Xinye Precision Machinery
Address: Building 2, No. 5, Shijing Industrial Park, Pingshan District, Shenzhen, China Mobile phone: 13823281286 (Chen Sheng)
Phone: + 86-755-8992 4486
Email: [email protected]
Mobile phone: 13686803292 (Lilian)
Phone: + 86-755-8992 4285-611
Email: [email protected]
Fax: + 86-755-89924858
1. Shenzhen Gantry Milling Safety Operation Process:
(1) The work should be clamped with pressure plates, screws or special tools. Use ordinary wrenches to avoid adding sleeves to avoid slipping and hurting people.
(2) The tool must be clamped firmly, otherwise it is not allowed to drive.
(3) Before work, check the operation of the transmission part of the machine tool and install the baffle of the machine tool before it can run.
(4) When milling various workpieces, especially rough milling, slow cutting should be started at the beginning.
(5) When moving the table and knife holder, loosen the fixing screws first.
(6) When loading and unloading knives, a copper hammer or mallet should be used to tap lightly to prevent the cutter fragments from flying out and hurting people.
(7) During cutting, it is forbidden to change speed and adjust the tool, and it is forbidden to touch or measure the workpiece by hand.
2.Shenzhen gantry milling processing structure: The gantry milling machine includes a bed, a work table erected on the bed and a numerical control circuit control system. The gantry milling machine bed is equipped with an X-axis guide rail, and the Shenzhen gantry milling working table is fastened across the bed. A gantry frame is provided on the movable span above the workbench. The gantry frame also includes: a gantry carriage, and the gantry carriage is movably clamped on the X-axis guide rail. Z-axis guide rail, mounted on the gantry. A beam, which is provided with a Z-axis carriage, and the beam is movably clamped on the Z-axis guide rail by the Z-axis carriage. A Y-axis rail is also installed on the beam. Milling device, gantry milling machine Milling device is movably installed on the Y-axis guide, so that the gantry is controlled by the CNC circuit control system for three-dimensional space milling of X, Y and Z axes.
Address: Building 2, No. 5, Shijing Industrial Park, Pingshan District, Shenzhen Tel: + 86-755-8992 4285-611 + 86-755-8992 4486
Mobile phone: +86 13823281286 (Chen Sheng), +86 13686803292 (Lilian)
Website: http://www.china-rfc.com Email: [email protected]
Scan QR code to get business card